Category Archives: Navigation

BMC050 eCompass (6-axes electronic compass)

Product description The BMC050 is a fully compensated electronic compass including a triaxial geomagnetic sensor and a triaxial acceleration sensor (6 degrees of freedom) that delivers excellent performance in very small size. The BMC050 allows for determining precise tilt-compensated geomagnetic heading information and for providing accurate acceleration sensor data.  The BMC050 6-axis, digital e-compass comes […]

BMC056 eCompass (6-axis digital compass)

Product description BMC056 is a low power and low noise 6-axis digital compass. It measures the earth’s geomagnetic field as well as dynamic and static acceleration in all three dimensions and outputs tilt-compensated heading or orientation information. BMC056 is housed in a package with a footprint of 3 x 3 mm2 and 0.95 mm height. […]

BMI055 6-axis inertial sensor

General description The BMI055 is an ultra-small, 6 axis inertial sensor, consisting of: A digital, triaxial 12bit acceleration sensor and a digital, triaxial 16bit, ±2000°/s gyroscope. The BMI055 allows very low-noise measurement of angular rates and accelerations in 3 perpendicular axes and thus senses tilt, motion, shock and vibration in cellular phones, handhelds, computer peripherals, […]

ADIS16375: Low Profile, Low Noise Six Degrees of Freedom Inertial Sensor

Product Description The ADIS16375 iSensor® is a complete inertial system that includes a tri-axis gyroscope and tri-axis accelerometer. Each sensor in the ADIS16375 combines industry-leading iMEMS® technology with signal conditioning that optimizes dynamic performance. The factory calibration characterizes each sensor for sensitivity, bias, alignment, and linear acceleration (gyro bias). As a result, each sensor has […]

SiNAV02 combined IMU and GPS system with a state-of-the-art ‘Fast Acquisition’ 12-channel GPS receiver technology

An integrated MEMS INS / GPS navigation system from Atlantic Inertial Systems with closely-coupled architecture. SiNAV02 combines Atlantic Inertial Systems’ successful miniature, high performance MEMS IMU; SiIMU02, with a state-of-the-art ‘Fast Acquisition’ 12-channel GPS receiver technology, power conditioning electronics and navigation processing. The closely-coupled architecture of SiNAV02, its embedded Line-Of-Sight integration and the specially developed […]

CRS09: a low-noise high-performance gyro in +/-100°/s and 200°/s variants

A low-noise high-performance gyro for demanding applications such as stabilisation, navigation and testing. CRS09 offers near FOG-gyro performance from robust silicon MEMS technology Available in +/-100°/s and 200°/s variants with analogue rate output signal. Internal temperature and silicon ring frequency outputs allow advanced temperature tracking for ultimate compensated performance. Mounting lugs provided for simple mechanical […]

CRG20: MEMS single-axis gyros in a variety of rate ranges – +/-75°/s and +/-300°/s and a new high rate range (800°/s) variant

A new low-cost miniature gyro, ideal for high volume applications where a performance edge is required. CRG20 is available in a variety of rate ranges – +/-75°/s and +/-300°/s and a new high rate range (800°/s) variant. Leadless chip carrier construction, supplied in volume on tape and reel. Evaluation and testing tools available to support […]

GG1178: Honeywell’s MEMS Rotational Rate Sensor with Digital or Analog Output

Honeywell’s GG1178 family of rotation sensors are high performance silicon micromachined angular rate sensors for multiple applications. They provide a low noise output signal with excellent performance over a large temperature range and in high vibration environments. A GG1178 rate sensor utilizes a MEMS, Micro Electro Mechanical System, sense element and a CMOS ASIC in […]

ADXRS150: ±150°/s Single Chip Yaw Rate Gyro with Signal Conditioning

Product Description The ADXRS150 is a 150 deg./sec. angular rate sensor (gyroscope) on a single chip, complete with all of the required electronics. The sensor is built using Analog Devices’ proprietary iMEMS® surface micromachining process, the same proven technology that has enabled the company to ship over 100 million inertial sensors. Two polysilicon sensing structures […]

SAR10 / SAR10H: Medium Performance Gyro

Key features High reliability and robustness over long lifetime Low vibration sensitivity High overload and shock Butterfly balanced design for high mechanical common mode rejection Closed-loop force feedback operation with electrostatic frequency tuning Ideal mono crystalline Si material Wafer level sealing with controlled Q-factor Low power Single voltage supply Fully digital with SPI communication and […]